Table of Contents
Advertisement
Note
Do not close the front cover
with force. If you cannot close
the front cover easily, check if
the pressure release levers are
returned to their original posi-
tions. If not, return them to their
original positions, and try clos-
ing the front cover again.
If you uninstall the fusing unit
accidentally
Usually, it is not necessary to remove
the fusing unit. Follow these steps to
reinstall the fusing unit.
R CAUTION:
• The fusing unit becomes very
hot. When installing the fusing
unit, turn off the printer and wait
about 30 minutes. After waiting,
install the fusing unit. Not waiting
for the unit to cool can result in a
burn.
A
Turn the printer's power switch
off.
B
Align the fusing unit with the
mark of the printer (A A A A ), and then
slide it in (B B B B ) as shown in the il-
lustration.
1
2
2
1
C
Return the brown fusing unit
lock levers to their original posi-
tions.
D
Close the front cover.
E
Turn the printer's power switch
on.
Removing Misfed Paper
4
69
Advertisement
Table of Contents
