Ricon LASER AP1600 Operating Instructions Manual page 38

Metric version
1
2
A
Good construction for envelopes
B
Poor construction for envelopes
• Do not use the non-supported envelopes listed on P.27 "Paper not supported
by this printer".
Paper not supported by this printer
Avoid using the following types of paper that are not supported by this printer:
• Paper whose weight is heavier or lighter than the limitation. ⇒ P.17 "Paper
Types and Sizes"
• Bent, folded or creased paper
• Curled or twisted paper
• Torn paper
• Wrinkled paper
• Damp paper
• Paper stuck together
• Paper that is dry enough to emit static electricity
• Paper that has already been printed on, with the exception of preprinted let-
terhead
Note
Ink on paper from an earlier print job, another copier, an inkjet printer or
other device could damage the fusing unit of this printer due to a differ-
ence in fusing temperatures.
• Coated paper (except the recommended one)
• Special paper like thermal paper, aluminum foil, carbon paper and conduc-
tive paper
• Heavily textured paper
• Glued paper
• Label paper on which glue or base paper is exposed
Paper and Other Media Supported by this Printer
Inch version
1
2
A
Good construction for envelopes
B
Poor construction for envelopes
3
27