Ricon LASER AP1600 Operating Instructions Manual page 71

Troubleshooting
Messages
Error
SC_3201
(Type 1 Printer on-
ly)
4
Error
SC_###
Note
If you cannot solve the problem by taking the preceding actions, turn the
printer power off and then on again. If this does not clear the error message,
take a note of the contents and number of the error message and contact your
sales or service representative.
60
Description
An error has occurred in the
optional board attached on
the left side.
An error has occurred in the
printer.
Comments
Turn the printer's power switch
off and then on.
Turn off the printer's power
switch. Reinstall the board and
turn on the printer's power
switch.
Turn off the printer's power
switch. Remove the board and
turn on the printer's power
switch.
Note
If you remove Network Inter-
face Board, you cannot per-
form the print job over the
network. You can send the
print job to the printer only
via a parallel cable connec-
tion.
If you remove the HDD, you
cannot send the collate job
and download the font to the
HDD using the Apple Print
Utility. This utility is a regis-
tered trademark of Apple
Computer, Inc.
If you remove the RS232C
board, you cannot perform
the print job via a serial cable
connection. You can send the
print job to the printer only
via a parallel cable connec-
tion.
First, turn the printer's power
switch off and then on. If the
message appears again, call your
sales or service representative.