Table of Contents
Advertisement
Paper and Other Media
C Return the catches to their orig-
inal positions.
3
Important
Confirm that the catches re-
turn to their original posi-
tions securely. If they are not
locked securely, paper mis-
feeds might occur.
C
Adjust the paper size dial to
match the size and feed direction
of paper in the paper tray.
Important
If you want to use the paper size
and feed direction that are not
indicated on the paper size dial,
set the dial to "p". In this case,
you should set the paper size
using the operation panel. See
30
D
Adjust the rear and side guides to
the paper size you want to load.
E
Load paper into the tray with the
print side up.
Important
Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
Confirm that paper fits under
the rear guide.
Advertisement
Table of Contents
