Table of Contents
Advertisement
1
System
/
2
Menu
Copies
I/O Timeout
Energy Saver
Description
You can set how many copies are printed.
1- 999
Note
Default: 1
You can set how many seconds the printer should wait be-
fore ending a print job. If data from other ports often appear
in the middle of the print job, you should increase the time-
out value.
15 seconds, 30 seconds, 60 seconds, 180 seconds, 300 sec-
onds
Note
Default: 30 seconds
You can set how many minutes or hours the printer wait
before switching to Energy Saver mode. Energy Saver
mode reduces electric power consumption.
Off, 15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours
Note
Default: 30 minutes
If there is an error in the printer, the printer will not turn
into Energy Saver mode.
When the printer switches to Energy Saver mode, the
Powerindicator turns off, while the On Line indicator
stays on.
Job Control Menu
5
89
Advertisement
Table of Contents
