Table of Contents
Advertisement
D
Move the printer to the edge of a
stable table or desk.
Important
Do not put the printer on an un-
stable or tilted surface.
If the printer is equipped with
the optional tray unit, do not
move the printer and the op-
tional tray unit together as they
are not securely attached.
When lifting the printer, con-
firm that the optional tray unit
is not attached to the printer.
E
Pick the stopper inside the roller
with your fingers (A A A A ), and slide it
to the left, so that the paper feed
roller can be released (B B B B ).
2
1
F
Wipe the rubber part of the roller
with a soft damp cloth. After that,
wipe it with a dry cloth to remove
the water.
Important
Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
G
With the round part of the roller
up (A A A A ), insert the roller into the
shaft until the roller clicks (B B B B ).
1
2
H
Move the printer to the place
where it was installed. Insert the
paper tray into the printer until it
stops.
I
Insert the plug of the power cord
into the wall socket securely.
Connect all the cables that were
removed in step B B B B .
Note
Follow the same procedure to
clean the paper feed roller of the
optional tray unit.
J
Turn the printer's power switch
on.
Cleaning the Printer
77
4
Advertisement
Table of Contents
