Dwell - Loma Superscan Micro ISC Manual

L o m a S u p e r s c a n M i c r o
CANCEL
CHANGE
Description:
The dwell is the time, or distance in vari-speed systems, that the reject device is activated for once the
reject device has been reached by the contaminated product.
Press the [ENTER] key, and then the [ ] or [ ] keys to adjust the reject dwell time.
Scope:
0.025 to 49.995 Seconds (0.005 to 9999m vari-speed).
Default:
0.025S (0m vari-speed)
Note:
For vari-speed systems the dwell time should be set at the slowest line rate to guarantee rejection of
all contaminated products.

DWELL

*DWELL 0.30S
SETUP
CALIBRATE
I S C
ENTER
RESULTS
MENUS A to Z
RUN DETECT
CALIBRATE
SYSTEM FAULT
RUN ERROR
17