Clear Errors - Loma Superscan Micro ISC Manual

MENUS A to Z
L o m a S u p e r s c a n M i c r o
CANCEL
CHANGE
Description:
Clearing a run error will turn the run error LED and Auxiliary relay off if it is configured for run error
indication, providing the error is no longer occurring. If the error is active, ie. still occurring, then the
run error will immediately come back putting the LED on.
Press the [ENTER] key to clear any run errors.
Notes:
Refer to the section on Error/Fault Logging for full details about run errors.
8

CLEAR ERRORS

CLEAR ERRORS?
SETUP CALIBRATE
I S C
ENTER
RESULTS
RUN DETECT
CALIBRATE
SYSTEM FAULT
RUN ERROR