Lock Keyboard - Loma Superscan Micro ISC Manual

MENUS A to Z
L o m a S u p e r s c a n M i c r o
CANCEL
CHANGE
Description:
Selection of this command causes the keyboard to become locked, so that no unauthorised users can
gain access to the detector settings, and the display will then default to showing the signal level.
To lock the keyboard press the [ENTER] key. At this menu command.
To gain access to the password entry to unlock the keyboard press any key. Entering the correct code
at the password prompt will then unlock the keyboard.
Notes:
To enable keyboard protection this facility must first have been enabled by entering a code at the key
code menu entry in the Setup menu.
Once the keyboard has been unlocked it will automatically lock itself if no keys have been pressed
within a period of five minutes.
32

LOCK KEYBOARD

LOCK KEYBOARD?
SETUP CALIBRATE
I S C
ENTER
RESULTS
RUN DETECT
CALIBRATE
SYSTEM FAULT
RUN ERROR