Sample Report; Calibrate - Loma Superscan Micro ISC Manual

L o m a S u p e r s c a n M i c r o
CANCEL
CHANGE
Description:
Press the [CALIBRATE] key to move into the calibrate menu from any other menu position, from
where Full Calibration, Update Calibration or Man Setup can be accessed.
Note:
A calibration report will be transmitted down the serial link upon completion of a calibration cycle,
only if report is enabled in the serial link menu, and the calibration report is enabled in the Report
Options menu.
---------------------------------------
: LOMA SUPERSCAN MICRO METAL DETECTOR :
---------------------------------------
Time : 15-32-16 Date : WED 20 SEP 1995
Product Number :
Product Identification :
Machine Identification :
Working Mode :
Working Mode Lock :
Minimum Threshold :
Maximum Threshold :
Detection Threshold :
Product Compensation :
Head Power :
Head Lock :
---------------------------------------

CALIBRATE

ANY DISPLAY
SETUP
CALIBRATE

SAMPLE REPORT

CALIBRATION REPORT
I S C
ENTER
RESULTS
1
CHEESE
MD12345
REACT
YES
500
15000
885
-448
MAX
NO
MENUS A to Z
RUN DETECT
CALIBRATE
SYSTEM FAULT
RUN ERROR
5