Xilinx AMS101 User Manual page 9

Table 1-1: AMS101 Evaluation Card Features
X-Ref Target - Figure 1-3
AMS101 Evaluation Card User Guide
UG886 (v1.3) November 6, 2013
Callout
1 Jumpers to select DAC or external signal source.
2 20-pin connector to the XADC header on the FPGA or AP SoC base board.
3 Pins allow for external analog input signals.
4 Digital I/O level translators.
5 16-bit DAC sets analog test voltage.
6 Reference buffer for DAC.
Figure 1-3: AMS Evaluator Tool GUI
www.xilinx.com
Component Description
Overview
UG886_c1_03_092512
9