Xilinx AMS101 User Manual page 23

Perform a Linearity Test
To analyze the linearity of the XADC, select the Linearity tab and click the Collect Data
button. After a short wait, both the integral and differential non-linearity data is displayed
on two separate plots along with the minimum and maximum values at the bottom of the
screen as shown in
X-Ref Target - Figure 2-14
AMS101 Evaluation Card User Guide
UG886 (v1.3) November 6, 2013
Figure 2-14.
Perform Linearity Test and Initiate Analog Ramp Output at DAC
Figure 2-14: Linearity Error Data Capture and Analysis
www.xilinx.com
Run Key Performance Tests
UG886_c2_14_092512
23