Table of Contents
Advertisement
Chapter 2: AMS101 Evaluation Card Quick Start
Select the appropriate COM port from the pull-down menu on the GUI as show in
Figure
kit name is displayed below the green Connected circle. If the AMS Evaluator tool is
unable to connect, be sure the correct COM port is selected and click refresh.
X-Ref Target - Figure 2-11
20
2-11. Then click the Connect button. After the AMS Evaluator tool is connected, the
Select COM Port Here
Figure 2-11: AMS Evaluator Tool COM Port Selection
www.xilinx.com
UG886_c2_11_092512
AMS101 Evaluation Card User Guide
UG886 (v1.3) November 6, 2013
Advertisement
Table of Contents
