Xilinx AMS101 User Manual page 17

The LEDs on the FPGA base board should light up as the design is downloading.
Figure 2-7
X-Ref Target - Figure 2-7
8.
X-Ref Target - Figure 2-8
AMS101 Evaluation Card User Guide
UG886 (v1.3) November 6, 2013
shows an example of the LEDs lit up after the KC705 board is programmed.
Figure 2-7: LEDs after Programming the FPGA with the Design
Run the AMS101 evaluator LabVIEW GUI executable file.
If the AMS Evaluator tool GUI was successfully installed, an icon should be displayed
on the desktop and in the Windows start menu (see
Evaluator tool GUI, click the red Xilinx X icon. The GUI shown in
appear.
Note:
Do not press anything on the GUI until
www.xilinx.com
Figure
step 9 is performed.
UG886_c2_08_091012
Figure 2-8: AMS Icon
Quick Start
UG886_c2_07_071012
2-8). To open the AMS
Figure 2-9 should
17