Xilinx AMS101 User Manual page 13

X-Ref Target - Figure 2-2
AMS101 Evaluation Card User Guide
UG886 (v1.3) November 6, 2013
Ensure switch is in OFF position
Figure 2-2: Power Switch on the FPGA Base Board
Three connections are required for the FPGA base board: power, the USB-UART
connection to the PC, and the JTAG Standard-A plug to Micro-B plug USB
programming cable. Figure 2-3
Caution!
Do not turn on the power switch until
www.xilinx.com
shows how to connect these on the KC705 base board.
step 6, page 16.
Quick Start
UG886_c2_02_062712
13