Table of Contents
Advertisement
Date
Version
02/14/2013
1.2
11/06/2013
1.3
UG886 (v1.3) November 6, 2013
Chapter 1, AMS101 Evaluation Card
were corrected to AMS evaluator tool. Added part HW-AMS101-G. Reference design
files are now downloaded from
www.xilinx.com/support/documentation/ams101_evaluation_card.htm. The AC701
board is now supported. The bullet with "
interface" was removed from section
information for the AMS evaluator tool graphical user interface is listed in the last
bullet on
page 7
and the bullet about "FPGA programming files..." was removed.
Chapter 2, AMS101 Evaluation Card Quick
16-bit dual DAC,
page
11. In
step 7, page
16, the AC701 kit and kit documentation references were added.
Various changes were added to
with XADC on AC701, page
Chapter 4, AMS Evaluator
page
44.
Appendix A, Targeted Design Platforms, Schematics, and Dynamic Performance Metric
Calculation
Methodology: AC701 was added to the
Platforms
section.
Appendix B, Required Jumper Settings for Base
AC701 Board, page
52.
Updated for Vivado® Design Suite 2013.3. Procedures in
the Vivado tool and the KC705 ZIP file name changed. Support for Zynq®-7000 ZC706
AP SoC was added in
Jumper Settings for the ZC706 Board, page
Appendix C, Additional Resources
page 55
was updated.
www.xilinx.com
Revision
Overview: Instances of AMS101 evaluator tool
AMS evaluator tool graphical user
AMS101 Evaluation Card, page
Start: The onboard
step 1, page
12, download information changed. In
step 9, page
18. Added section
24.
Tool: Decimation information and
Supported Targeted Design
Boards: Added
links. The link to the
AMS101 Evaluation Card User Guide
7. Download
signal source is from a
Power Monitoring
Table 4-2
were added on
Jumper Settings for the
step 7, page 16
were revised for
52. Updated
Declaration of Conformity,
Advertisement
Table of Contents
