Auto Print; Process Print - TOSHIBA TEC Corporation B-FP Series Manual

7.6.10
The factory test print is performed on the following conditions. The parameter settings and the print density
fine adjustment value are ignored.

After each test pattern is printed, the factory test print is performed when the [POWER] key is pressed.

When the [PAUSE] and [FEED] key is pressed at the same time, the display returns to the menu.

Other keys are invalid.
Print test pattern
Issue count
Sensor type
Issue mode
Label pitch
Print density fine adjustment
value
7.6.11
Auto Print(R)
Feeding 1 label
Printing 3-dot slant lines
Printing barcode
Printing characters
5 labels each
Reflective sensor
Continuous issue
63 mm
±0

Process Print

-90-