Set Param - TOSHIBA TEC Corporation B-FP Series Manual

7.4 Set PARAM

Contents of Set PARAM menu
MENU ITEM
SYSTEM MODE
3. Set PARAM
LCD Contrast
Code Page
Zero Font
LCD Language
Control Code
EURO Code
Maxicode Spec
Auto Off
Error Power Off
Sleep
LCD Off
Charge Mode
Auto Head CHK
Head Error CHK
Head Error PRT
Feed Check
XML
Password
<Supplemental Explanations>
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter setting, repeat mode is
enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after setting, then stored in
the backup memory.
-62-