Online Mode; General View Of Key Operation - TOSHIBA TEC Corporation B-FP Series Manual

5 ONLINE MODE

5.1 GENERAL VIEW OF KEY OPERATION

Online Mode
Hold down
[FEED]+
[PAUSE]+
[POWER]
(10 sec. or more)
Hold down [POWER]
(1 sec. or more)
[FEED]
[PAUSE] [PAUSE]
Hold down
[POWER] (1 sec.
or more)
[FEED]
[POWER]
Hold down
[PAUSE] (3 sec.
or more)
Hold down
[FEED] (3 sec.
or more)
[PAUSE]
(*1) In TPCL1 mode, [FEED] key in Online state moves as reprint.
But when it is after power on or emulation changed, it moves as paper feed.
The other mode, it moves as paper feed.
(2) If it is in top menu, cursor moves to 1.Reset.
Forced
power OFF
Power OFF
(*1)
Paper feed,
Reprint
Pause
Power OFF
Paper feed
Setting value
display
RS, BD, IP
Hold down
[POWER] (1 sec.
or more)
[FEED]
Hold down
[PAUSE]
(3 sec.
or more)
Hold down
[FEED] (3 sec.
or more)
[PAUSE]
Power OFF
Paper feed
User System Mode
Reset
[PAUSE]
Mode Setting
[PAUSE]
Set PARAM
[PAUSE]
Adjust Set
[PAUSE]
Dump Mode
[PAUSE]
Press [FEED]: Moves the menu in the opposite direction
from when [PAUSE] is pressed.
Press [POWER]:
Hold down [POWER]: Moves to the top menu in User System
* The printer power cannot be turned off under this condition.
THRESHOLD
Transmissive  Reflective
It can be selected sensor type by [FEED] and [PAUSE] key
* The printer power cannot be turned off under this condition.
-3-
Printer state
Printer function
[PAUSE]
BASIC Setup
[PAUSE]
I/F Setting
[PAUSE]
Expand Mode
Moves to each setting/process.
Mode. (*2)
Hold down [POWER]
(Release after 1.5 or more
labels are fed.)