Parameter Clear (Parameter) - TOSHIBA TEC Corporation B-FP Series Manual

7.8.2
The parameters settings are cleared.
Destination is selectable for parameter clear. The destination code printed on the top right corner of the
maintenance counter printout shows which destination was selected for the parameter clear.
 QM TYPE
 JA TYPE
<Supplemental Explanations>
1.
To comfirm which destination after parameter clear, it can be checked sight top of maintenance counter
<Maintenance counter image>
<< COUNTER >>
TOTAL FEED 4.8km
FEED 0.0km
FEED1 4.8km
2.
LCD image at parameter clear
Clearing
After clear

Parameter Clear (Parameter)

RAM clear for Global model
RAM clear for Japan model
[QM]
-95-