Led Check - TOSHIBA TEC Corporation B-FP Series Manual

7.2.4
The print head check procedure is the same as that for the maintenance counter data. 8.2.1 MAINTE CNT..
The following table shows the menu structure from the top menu of the system mode to LED Check.
MENU ITEM
SYSTEM MODE
1.Diagnostic

LED Check

LED lighting pattern
STATUS LED: Turns on for 3 sec. (green)
↓
STATUS LED: Turns off
↓
STATUS LED: Turns on for 3 sec. (red)
↓
STATUS LED: Turns off
↓
STATUS LED: Turns on for 3 sec. (orange)
↓
STATUS LED: Turns off
↓
CHARGE LED: Turns on for 3 sec. (orange)
↓
CHARGE LED: Turns off
LED check image
While checking
Displays "CHECKING".
In the case of test complete
Displays "Test Completed"
LED Check
-55-