Resume Printing After Broken Dots Error Setting (Head Error Prt); Feed To Top Of Feed After Cover Close Setting (Feed Check); Xml Setting (Xml) - TOSHIBA TEC Corporation B-FP Series Manual

7.4.15
This setting selects whether or not the printer resumes printing after a broken dots error occurs.

OFF

ON
Default value: OFF
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o
7.4.16
This setting selects whether or not the printer feeds the paper to the top of feed after the cover is closed.

OFF

ON
Default value: OFF (The printer does not feed the paper to the top of feed.)
<Supplemental Explanations>
The printer feeds the paper to the top of feed when the print mode is TPCL, TPCL1, or LABEL
and a sensor, transmissive or reflective is used.
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o
7.4.17

OFF

STD

ORACLE
Default value: OFF
<Supplemental Explanations>
If the XML setting is STD or ORACLE, issue mode is automatically changed to TPCL.
However, even when this setting is changed to OFF (disabled), the issue mode does not change, i.e.
TPCL is still selected.
* To use the re-issue function, the issue mode must be changed to TPCL1.
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o

Resume Printing After Broken Dots Error Setting (Head Error PRT)

The printer does not resume printing after a broken dots error occurs.
The printer resumes printing after a broken dots error occurs.
C Mode
o

Feed To Top Of Feed After Cover Close Setting (Feed Check)

The printer does not feed the paper to the top of feed.
The printer feeds the paper to the top of feed.
C Mode
ｘ

XML Setting (XML)

XML setting is disabled.
Standard XML setting is enabled.
Oracle XML setting is enabled
C Mode
x
ESC/POS Z Mode
o o
ESC/POS Z Mode
x x
ESC/POS Z Mode
x x
-71-