Diagnostic - TOSHIBA TEC Corporation B-FP Series Manual

7.2.2
The procedure for printing the self-diagnosis result is the same as that for the maintenance counter data.
7.3.1 MAINTE CNT.
The following table shows the menu structure from top menu of the system mode to Diagnostic.
MENU ITEM
SYSTEM MODE

1.Diagnostic

Diagnostic
When an error occurs while printing, the error message is displayed, the STATUS LED blink red.
Though the error can be cleared by presing [PAUSE] key, the printer does not print the erroneous label.
Diagnostic
CHECKING & PRINT
-46-