Diagnostic; Mainte Cnt - TOSHIBA TEC Corporation B-FP Series Manual

7.2

Diagnostic

Contents of Diagnostic menu
MENU ITEM
SYSTEM MODE
1.Diagnostic

MAINTE CNT

Diagnostic
Head Check
LED Check
LCD Check
7.2.1
This section describes how to print out the maintenance counter data.
The following table shows the menu structure from the top menu of the system mode to MAINTE CNT.
MENU ITEM
SYSTEM MODE
1.Diagnostic
MAINTE CNT
When an error occurs while printing, the error message is displayed, the STATUS LED blink red.
Though the error can be cleared by presing [PAUSE] key, the printer does not print the erroneous label.
MAINTE CNT
CHECKING & PRINT
-38-