Paper Size For Esc/Pos Setting - TOSHIBA TEC Corporation B-FP Series Manual

7.5.7
Max. Min. value
value
80
Default value: 80mm
<Supplemental Explanations>
This setting is effective only in the ESC/POS mode. There is no command to set paper width in the ESC/POS
mode. If a paper of which width is short for the print width, the print start position may be outside of the paper. To
prevent this problem, the width of paper to be loaded in the printer must be specified.
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
x
Paper Size for ESC/POS Setting (ESC/POS Width）
Step Display
25
1 Decimal
C Mode
x
Sign Integer
digit
None 2
ESC/POS Z Mode
x
o
-81-
Decimal 0-padding
place
0 None
Unit of
measure
mm