Head Check - TOSHIBA TEC Corporation B-FP Series Manual

7.2.3

Head Check

The print head check procedure is the same as that for the maintenance counter data. 8.2.1 MAINTE CNT..
The following table shows the menu structure from the top menu of the system mode to Head Check.
MENU ITEM
SYSTEM MODE
1.Diagnostic
Head Check
Head check image
While checking
Displays "CHECKING".
In the case of normal end
Displays "NORMAL END"
When broken dots are detected. *1
The STATUS LED blink red and the CHARGE
LED turns off.
*1 It can be recovered by PAUSE button.
-54-