Battery Charge Mode Setting (Charge Mode); Automatic Print Head Check For Broken Dots At Power On Setting; Print Head Check For Broken Dots After Cover Close Setting (Head Error Chk) - TOSHIBA TEC Corporation B-FP Series Manual

7.4.12
This setting enables selecting the battery charge mode.

NORMAL

LOW
Default value: NORMAL
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o
7.4.13
This setting selects whether or not an automatic print head check for broken dots is to be automatically performed when
the power is turned on.

OFF

ON
Default value: OFF
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o
7.4.14
This setting selects whether or not a print head check for broken dots is to be performed after the cover is closed.

OFF

ON
Default value: OFF
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o

Battery Charge Mode Setting (Charge Mode)

Normal mode
Battery protection mode (Low charge voltage)
C Mode
o

Automatic Print Head Check for Broken Dots At Power On Setting

(Auto Head CHK)
An automatic print head check for broken dots is not performed
when the power is turned on.
An automatic print head check for broken dots is performed
when the power is turned on.
C Mode
o

Print Head Check For Broken Dots After Cover Close Setting (Head Error CHK)

A print head check for broken dots is not performed after the cover is closed.
A print head check for broken dots is performed after the cover is closed
C Mode
o
ESC/POS Z Mode
o o
ESC/POS Z Mode
o o
ESC/POS Z Mode
o o
-70-