Icon - TOSHIBA TEC Corporation B-FP Series Manual

5.5.2
Five kinds of icon are displayed in the top line of the online mode display.
These icons are displayed in the online mode/error display.
Each mark are updated every 5 seconds.

Icon

Wireless LAN icon
Bluetooth icon
Data transmission icon
Battery level mark (*1)
Error mark
Icon
Explanation
Displayed and used when the wireless LAN module is mounted.
The graph shows the strength of radio wave.
Graph 0: Outside the communication range
Graph 1: Strength of radio wave is weak.
Graph 2: Strength of radio wave is middle
Graph 3: Strength of radio wave is strong
Graph 4: Strength of radio wave is very strong
Displayed and used when the wireless Bluetooth module is mounted.
OFF: Bluetooth connection invalid
ON: Bluetooth connection valid
Appears when a print job is present.
No connection
Data receiving
Data sending
Data receiving and sending
Indicates a remaining battery power level (10 increments)
(Level1) Inoperative (low battery): (0%)
(Level2) Low (near-low battery): (10, 20%)
(Level3) Medium: (30, 40, 50, 60%)
(Level4) High: (70, 80%)
(Level5) Full (full charge): (90, 100%)
Charging
Indicates a printer error status
Not in error state
OFF
In error state
-8-