Label Length Setting (Label Length); Paper Feed Mode Setting (Paper Feed) - TOSHIBA TEC Corporation B-FP Series Manual

7.6.1.4
This setting selects a label length for test print.
Max. Min. value
value
999
Default value: 63mm
<Supplemental Explanations>

The label length, which is larger than the image buffer length, cannot be specified. If specified, the printer prints
the data of image buffer length, then stops.
7.6.2
This setting is used to feed a paper without performing printing in system mode where the [FEED] key is invalid to
feed a paper.
 NO FEED
 FEED
Default value: NO FEED
<Supplemental Explanations>
By selecting an option using the [FEED] key and determining it using the [POWER] key feeds the paper by an
amount specified by LABEL LEN. (See the previous section.). If the label length is not specified, the paper
is fed by 63 mm.

Label Length Setting (Label Length)

Step Display
5
1 Decimal

Paper Feed Mode Setting (Paper Feed)

Paper is not fed.
Paper is fed.
Sign Integer
digit
None 3
-85-
Decimal 0-padding
place
0 None
Unit of
measure
mm