Print Tone Fine Adjustment (Tone Adjust); Reflective Sensor Manual Threshold Fine Adjustment (Refl Sensor) - TOSHIBA TEC Corporation B-FP Series Manual

7.5.3
This setting finely adjusts the print tone against the value automatically set.
Max. Min. value
value
+30
Default value: 0step
<Supplemental Explanations>
 Tone "+" means Darker,"-" means lighter.
+30 <- Darker <-
 The printer is controlled by the total amount determined by this command and the Position
Fine Adjustment command sent from the PC. However, the maximum value is ±30 step.
Support mode (o：valid、x：invalid）
TPCL, TPCL1,
LABEL
o
7.5.4
Max. Min. value
value
4.0
Default value: 1.0V
<Supplemental Explanations>
 This setting is effective only in the TPCL and TPCL1 modes.
 If it sets 0.0V, it cnanges to default value (1.0V) automatically.

Print Tone Fine Adjustment (Tone Adjust)

Step Display
-30
1 Decimal
0(standard) -> Lighter -> -30
C Mode
o

Reflective Sensor Manual Threshold Fine Adjustment (REFL Sensor)

Step Display
0.0
0.1 Decimal
Sign Integer
digit
Exist 2
ESC/POS Z Mode
o
x
Sign Integer
digit
None 1
-78-
Decimal 0-padding
place
0 None
Decimal 0-padding
place
1 None
Unit of
measure
step
Unit of
measure
V