Interface Setting (I/F Setting); I/F Setting; Usb Serial Number Setting (Usb); Wireless Lan Enable/Disable Setting (Wlan) - TOSHIBA TEC Corporation B-FP Series Manual

7.9

Interface Setting (I/F Setting)

Contents of INTERFACE menu
MENU ITEM

8. I/F Setting

USB
WLAN *1
Bluetooth *2
*1 It shows only for B-FP3D-GH/GS40
*2 It shows only for B-FP3D-GH/GS30
<Supplemental Explanations>
 When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is
pressed.
 When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system mode menu.
 When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter setting, repeat
mode is enabled and the key pressed is repeatedly entered.
 The change in the parameter setting becomes effective when the [POWER] key is pressed after setting, then
stored in the backup memory.
7.9.1
Set USB serial ID
Range: 000000000000～Z00000000000
* Characters that can be used for setting: Space, 0 to 9, A to Z
7.9.2
Contents of WLAN menu
MENU ITEM
8.I/F Setting
WLAN
Mode
Channel
TCP/IP / TCP/IP

USB Serial Number Setting (USB)

Wireless LAN Enable/Disable Setting (WLAN)

-101-