Issue Count Setting (Issue Count); Sensor Setting (Sensor); Print Type Setting (Print Type) - TOSHIBA TEC Corporation B-FP Series Manual

7.6.1.1
This setting sets the number of labels to be printed for test print.
 1
 3
 5
 10
 50
 100
 500
 1000
 5000
Default value: 1
7.6.1.2
 NONE
 REFLECTIVE
 TRANSMISSIVE
Default value: NONE
7.6.1.3
This setting selects a print type, auto mode using the strip sensor or fixed mode (BATCH or STRIP) regardless of a
sensor status.
 AUTO
 BATCH
 STRIP
Default value: AUTO
* In B-FP3D-GS30/40, the setting is always BATCH.

Issue Count Setting (Issue Count)

Sensor Setting (Sensor)

No sensors used,
i.e. position is not detected (when using receipt paper)
Transmissive sensor (when using tag paper with black mark)
Reflective paper (when using label paper)

Print Type Setting (Print Type)

Print depending on the sensor used
Fixed to batch issue
Fixed to strip issue
-84-