Value Setting Display - TOSHIBA TEC Corporation B-FP Series Manual

6.3 VALUE SETTING DISPLAY

The value setting display is used for setting a value by increasing or decreasing it.
It is comprised of the following parts.
Display example (English)
Title
Setting range
The currently programmable item is reverseed.
The display of the symbols like "+" and "-", and the unit of measure like "mm" and "step" differs depending on the
item to be set.
Setting display with one field
Setting display with multiple fields (placed
horizontally)
Key function (Setting display with one field)
Key
[FEED] + [PAUSE]
[POWER]
[FEED]
[PAUSE]
Key operation (Setting display with multiple fields (horizontal))
Key
[FEED] + [PAUSE]
[POWER]
[FEED]
Function
Returns to the upper hierarchy without saving changes.
Saves the changes and returns to the upper hierarchy.
Increases the setting value by specified step. When the setting
value reaches the maximum, it goes to minimum.
Decreases the setting value by specified step. When the setting
value reaches the minimum, it goes to maximum.
Function
Returns to the upper hierarchy without saving changes.
Saves the changes and returns to the upper hierarchy.
Increases the setting value by specified step. When the setting
value reaches the maximum, it goes to minimum.
Sub title
Setting value
-33-