7.8.3
The maintenance counter, including label distance covered, is cleared.
FEED
PRINT
ALL
<Supplemental Explanations>
Item of counter clear and default value after clear.
Item of counter clear
1. FEED
2. PRINT
3. SYSTEM ERROR
<Ex. Contents of maintenance counter>
<< COUNTER >>
TOTAL FEED
FEED
FEED1
FEED2
FEED3
FEED4
PRINT
PRINT1
PRINT2
PRINT3
PRINT4
SYSTEM ERR 0
Print Result of Maintenance Counter Values and Various Parameter Values After Each Type of Clear
Clear when replacing the platen (FEED)
The total feed up to the last feed moves to FEED1 and the FEED1 value moves to FEED2. (The FEED 4
value is cleared.)
Clear when replacing the print head (PRINT)
The total print length up to the last print moves to PRINT1 and the PRINT1 value moves to PRINT2. (The
PRINT 4 value is cleared.)
When clearing every thing (ALL)
Both the FEED and PRINT values move.
Maintenance Counter Clear (MAINTE Count)
default value
after clear
0km
0km
0
4.8km
[QM]
0.0km
1. FEED
4.8km
0.0km
0.0km
0.0km
0.0km
2. PRINT
4.5km
0.0km
0.0km
0.0km
3. SYSTEM ERROR
Clear item
All counte
FEED
counter
r
o
o
o
o
-98-
Print
counter
o