Basic Setup; Basic Interpreter Setting (Basic); Basic File Browser (File Mainte); Basic Trace Setting (Trace) - TOSHIBA TEC Corporation B-FP Series Manual

7.10 BASIC Setup

Contents of ASIC Setup menu
ITEM NAME
9. BASIC Setup
BASIC
File MAINTE
Trace
Expand Mode
7.10.1

This setting selects whether the BASIC interpreter setting is enabled or disabled.
 OFF
 ON
Default value: OFF
7.10.2
This function displays data stored in the BASIC file storage area (00 to 13).
The number of data that can be displayed differs depending on the BASIC file storage area allocated.
* The above shows the LCD display when there is no data stored. For the LCD display when there is data stored,
please see below.
LCD display when there is stored data:
* If BASIC area is not allocated, LCD shows blank.
7.10.3
This setting selects whether the BASIC trace setting is enabled or disabled.
 OFF
 ON
Default value: OFF
7.10.4
The BASIC expansion mode program runs under the following conditions:
 The BASIC expansion mode program has already been loaded.
 The BASIC interpreter setting is set to ON (enabled).
After the BASIC expansion mode is started, LCD display and operations depend on the BASIC expansion mode

BASIC Interpreter Setting (BASIC)

Disabled
Enabled

BASIC File Browser (File MAINTE)

It displays Registration No and Name of data stored (Max. 9 characters)
(IF there is no data, it displays '-').

BASIC Trace Setting (Trace)

Disabled
Enabled

BASIC Expansion Mode (Expand Mode)

-108-