Expand Mode; I/F Set; Basic Setup - TOSHIBA TEC Corporation B-FP Series Manual

16-byte data is printed on one line.
Data is printed, starting from the newest data to the older data.
Data pointed by the receive buffer write pointer is printed in bold type.
NOTE:
If an error occurs when printing the receive buffer dump, the printer displays an error message, and stops.
The error is cleared by pressing the [PAUSE] key, and the display is returned to the PRINT menu. After the
error is cleared, data is not automatically reprinted
9.7

Expand Mode

Same as 7.10.4 Expand Mode of the system mode.
9.8

I/F SET

Same as 7.9 I/F Setting of the system mode.
9.9

BASIC Setup

Same as 7.10 BASIC Setup of the system mode.
-114-