Scope; Outline; Operation Panel - TOSHIBA TEC Corporation B-FP Series Manual

1 SCOPE

This specification describes key operations of the B-FP3D series portable printers using their keys and the LCD
display.

2 OUTLINE

The key operations are performed roughly in two modes: online mode and system mode. In online mode, where
the printer is connected to a host device such as a personal computer, the key operations are performed mainly to
pause or restart the printer and to display printer status messages and error messages on the LCD. In system
mode, the key operations are performed mainly to conduct a self-test and to make various parameter settings.
This specification describes the key operations in these two modes.
For explanation purposes, this specification uses English key names and LCD messages of the B-FP, although
other languages are available for key names and LCD messages.

3 OPERATION PANEL

POWER FEED
PAUSE
STATUS
CHARGE
-1-