Salicru SLC ADAPT2 Series User Manual page 48

7.5.2. Table of UPS Warnings
No.
1 WRN_BATTERY_NOT_CONNECTED
2 WRN_MODULE_ON_LESS
3 WRN_UTILITY_ABNORMAL
4 WRN_BYPASS_VOLT_ABNORMAL_R
5 WRN_BYPASS_VOLT_ABNORMAL_S
6 WRN_BYPASS_VOLT_ABNORMAL_T
7 WRN_BYPASS_MODULE_OVER_LOAD_R
8 WRN_BYPASS_MODULE_OVER_LOAD_S
9 WRN_BYPASS_MODULE_OVER_LOAD_T
10 WRN_BYP_FREQ_OVER_TRACK
11 WRN_EXCEED_TX_TIMES_LMT
12 WRN_BATTERY_VOLT_LOW
13 WRN_LOST_N_X_REDUNDANT
14 WRN_BATTERY_TEST_FAIL
15 WRN_BATTERY_MAINTENANCE_FAIL
16 WRN_AMBIENT_OVER_TEMP
17 WRN_INPUT_VOLT_DETECT_FAIL
18 WRN_OUTLET_TEMP_ERROR
19 WRN_DC_BUS_OVER_VOLT
20 WRN_INLET_OVER_TEMP
21 WRN_BATTERY_OVER_TEMP
22 WRN_BYPASS_FAN_EXPIRED
23 WRN_CAPACITOR_EXPIRED
24 WRN_FAN_EXPIRED
25 WRN_OUTLET_DELTA_TEMP
26 WRN_BATTERY_EXPIRED
27 WRN_DUST_FILTER_EXPIRED
28 WRN_BYPASS_OVER_TEMP
29 WRN_RTC_BATT_LOW
48
NAME OF ALARM DESCRIPTION
Battery disconnected
There are not enough Modules to supply the Inverter load
Rectifier Input voltage out of range
Bypass voltage out of range in Phase R
Bypass voltage out of range in Phase S
Bypass voltage out of range in Phase T
Bypass overload in Phase R
Bypass overload in Phase S
Bypass overload in Phase T
Modules and Bypass Synchronisation fault
Bypass transfer attempts exceeded
Battery voltage low
Loss of Redundancy
Battery Test results in Fail
Discharge Test results in Fail
Ambient overtemperature
Rectifier input voltage fault
Error in outlet air temperature measurement
DC bus overvoltage
Module inlet air over-temperature
Battery over-temperature
Excess Operating Time of the fans in the Bypass
Excess Operating Time of the capacitors in the Modules
Excess Operating Time of the fans in the Modules
Internal over-temperature
Excess Battery Operating Time
Excess Dust Filter Operating Time
Bypass over-temperature
Low voltage in Lithium battery of the clock and Non-volatile
Memory
TYPE OF ALARM
UPS
UPS
MODULE
UPS
UPS
UPS
UPS
UPS
UPS
UPS
MODULE
MODULE
UPS
MODULE
MODULE
UPS
MODULE
UPS
MODULE
MODULE
UPS
UPS
MODULE
MODULE
MODULE
UPS
UPS
UPS
UPS
SALICRU