Salicru SLC ADAPT2 Series User Manual page 3

6.3.2. Procedure to switch from maintenance bypass mode to
normal mode.
6.4. EPO PUSH BUTTON (EMERGENCY STOP). PROCEDURE.
6.4.1. Complete stop of the UPS, with EPO.
6.4.2. UPS restart after full stop with EPO.
6.5. AUTOMATIC RESTART.
6.6. OPERATING INSTRUCTIONS FOR MAINTENANCE OF
POWER MODULES.
6.6.1. Maintenance guide for power modules.
6.6.1.1. With the system operating in normal mode and the
normal bypass voltage and frequency, with at least 1
power module as redundant:
6.6.1.2. No power modules operating as redundant:
6.7. OPERATING INSTRUCTIONS FOR MAINTENANCE OF THE
BYPASS AND MONITORING MODULE.
6.7.1.1. With the system operating in Normal Mode and normal
bypass voltage and frequency, transfer the load over the
manual bypass.
6.8. LANGUAGE SELECTION.
6.9. CHANGING THE CURRENT DATE AND TIME
6.10. LEVEL CONTROL PASSWORD.
7. MONITORING PANEL WITH LCD TOUCH
SCREEN.
7.1. INTRODUCTION.
7.2. FUNCTIONS OF THE RGB LEDS.
7.3. ACOUSTIC ALARM.
7.4. DESCRIPTION OF THE SCREENS SHOWN ON THE LCD
TOUCH SCREEN.
7.4.1. Start menu or main screen.
7.4.1.1. Access to menus and sub-menus from the Main screen.
7.4.1.2. Information content of the Main Screen.
7.4.1.3. Map of screens accessible from the Main Screen.
7.4.2. Measurements menu.
7.4.3. UPS alarms menu.
7.4.4. Status & Ops menu.
7.4.5. Rated values menu.
7.4.6. Charts menu.
7.4.7. Advanced menu
7.4.8. Other screens
7.5. TABLES OF ALARMS, WARNINGS AND EVENTS.
7.5.1. Table of UPS Alarms.
7.5.2. Table of UPS Warnings
7.5.3. UPS Events list
USER MANUAL
8. OPTIONS
8.1. INTERNAL MANUAL BYPASS.
8.2. AMBIENT TEMPERATURE SENSOR.
9. WARRANTY.
9.1. WARRANTY CONDITIONS.
9.1.1. Terms of the warranty.
9.1.2. Exclusions.
9.2. TECHNICAL SERVICES NETWORK.
10. GENERAL TECHNICAL FEATURES.
10.1. INTERNATIONAL STANDARDS.
10.2. ENVIRONMENTAL CHARACTERISTICS.
10.3. MECHANICAL CHARACTERISTICS.
10.4. ELECTRICAL CHARACTERISTICS.
10.4.1. Electrical characteristics (rectifier input).
10.4.2. Electrical characteristics (DC Bus).
10.4.3. Electrical characteristics (Inverter output).
10.4.4. Electrical characteristics (Bypass input).
10.4.5. Communications.
10.5. EFFICIENCY.
11. ANNEXES.
11.1. ANNEX I: CONNECTION CONFIGURATION FOR SINGLE
MAINS SUPPLY TO RECTIFIER-PFC - STATIC BYPASS.
11.2. ANNEX II. CONNECTIVITY.
11.2.1. Registering the device in the cloud
11.2.1.1. Nimbus portal.
11.2.1.2. Create account
11.2.1.3. Log in
11.2.1.4. Adding a device
11.2.1.5. Using a QR code
11.2.1.6. Log in
11.2.1.7. Adding the device
11.2.2. General technical specifications
12. GLOSSARY
SLC ADAPT 2 - UNINTERRUPTIBLE POWER SUPPLY SYSTEM -
3