How To Handle Options; Memory Card - Yamaha ERCX Series User Manual

16-2 How to Handle Options

16-2-1 Memory card

A memory card (option) can be used with the TPB to back up the ERCX controller data.
■ Using the memory card
1. Insert the memory card into the TPB as shown in Fig. 16-1.
2. Back up the data by referring to section "10-6 Using a Memory Card" in Chapter 10.
Fig. 16-1 Inserting the memory card
TPB
Fig. 16-2 Replacing the battery
Battery
Holder
■ Precautions when using the memory card
1. Insert the memory card all the way inwards until you feel it makes contact.
2. Be careful not to insert the memory card facing the wrong direction. The mark "∆" should be
facing upward. (A pin for preventing reverse insertion is provided.)
3. Insert or pull out the memory card only when the power is supplied to the TPB.
4. Never eject the memory card while backing up data.
5. The memory card should be used under the following environmental conditions:
Ambient temperature range
Ambient humidity range
Storage temperature range
6. Do not leave the memory card inserted in the TPB when not in use, since this will shorten the
battery life.
The battery life is about 5 years (at ambient temperature of 25°C).
If the battery voltage drops, an alert message appears on the TPB, so replace the battery by
referring to Fig. 16-2.
Battery product number
Memory card
+
Holder terminal
Terminal
Battery holder (viewed from back side)
: -10 to 40°C
: Below 85% RH
: -20 to 60°C
: Panasonic BR2325 or CR2325 (64KB card) or
equivalent type
16-2 How to Handle Options
16-
16
3