Edit Ip; Figure 257 Menu 11.1: Remote Node Profile For Pptp Encapsulation; Table 182 Menu 11.1: Remote Node Profile For Pptp Encapsulation - ZyXEL Communications ZyWall 70 User Manual

ZyWALL 70 User's Guide

Figure 257 Menu 11.1: Remote Node Profile for PPTP Encapsulation

The next table shows how to configure fields in menu 11.1 not previously discussed.

Table 182 Menu 11.1: Remote Node Profile for PPTP Encapsulation

FIELD
Encapsulation
My IP Addr
My IP Mask
Server IP Addr
Connection ID/
Name
Schedules
Nailed-Up
Connections

33.4 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes.
Press [ENTER] to open Menu 11.1.2 - Remote Node Network Layer Options.
466
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Outgoing:
My Login=
My Password= ********
Retype to Confirm= ********
Authen= CHAP/PAP
PPTP:
My IP Addr= 10.0.0.140
My IP Mask= 255.255.255.0
Server IP Addr= 10.0.0.138
Connection ID/Name=
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu
11.3 to check the IP Address setting once you have selected the encapsulation
method.
Enter the IP address of the WAN Ethernet port.
Enter the subnet mask of the WAN Ethernet port.
Enter the IP address of the ANT modem.
Enter the connection ID or connection name in the ANT. It must follow the "c:id" and
"n:name" format.
This field is optional and depends on the requirements of your DSL modem.
You can apply up to four schedule sets here. For more details refer to
on page 559.
Press [SPACE BAR] and then [ENTER] to select Yes if you want to make the
connection to this remote node a nailed-up connection.
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel:
Chapter 33 Remote Node Setup
Chapter 44