Table 57 Main Menu Commands - ZyXEL Communications Prestige 2302R User Manual

Prestige 2302R Series User's Guide
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 57 Main Menu Commands

OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a "hidden"
menu
Move the cursor
Entering
information
Required fields
N/A fields
Save your
configuration
Exit the SMT
After you enter the password, the SMT displays the main menu, as shown next.
172
KEYSTROKE DESCRIPTION
[ENTER] To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
[ESC] Press [ESC] to move back to the previous menu.
Press [SPACE Fields beginning with "Edit" lead to hidden menus and have
BAR] to change No a default setting of No. Press [SPACE BAR] once to change
to Yes then press No to Yes, and then press [ENTER] to go to the "hidden"
[ENTER]. menu.
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field. You
[DOWN] arrow can also use the [UP]/[DOWN] arrow keys to move to the
keys. previous and the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key
to move to the bottom of a menu.
Type in or press You need to fill in two types of fields. The first requires you to
[SPACE BAR], type in the appropriate information. The second allows you
then press to cycle through the available choices by pressing [SPACE
[ENTER]. BAR].
?
< > or ChangeMe All fields with the symbol <?> must be filled in order to be
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.
[ENTER] Save your configuration by pressing [ENTER] at the
message "Press ENTER to confirm or ESC to cancel".
Saving the data on the screen will take you, in most cases to
the previous menu.
Make sure you save your settings in each screen that you
configure.
Type 99, then Type 99 at the main menu prompt and press [ENTER] to exit
press [ENTER]. the SMT interface.
Chapter 16 Introducing the SMT