Figure 33-7 Examples Of Error And Information Messages; Figure 33-8 Menu 24.3.2: System Maintenance: Unix Syslog (Zywall 100) - ZyXEL Communications ZyWall 10 User Manual

0 Wed Aug 22 21:23:26 2001 PP17
1 Wed Aug 22 21:23:26 2001 PP17
2 Wed Aug 22 21:23:54 2001 PINI
3 Wed Aug 22 21:24:26 2001 PP0d
4 Wed Aug 22 21:24:26 2001 PP17
5 Wed Aug 22 21:24:26 2001 PP0d
6 Wed Aug 22 21:24:26 2001 PP17
7 Wed Aug 22 21:24:26 2001 PP17
8 Wed Aug 22 21:24:26 2001 PP17
10 Thu Aug 23 08:26:59 2001 PINI -WARN
11 Thu Aug 23 08:26:59 2001 PINI
12 Thu Aug 23 08:27:04 2001 PP17
13 Thu Aug 23 08:27:28 2001 PINI
14 Thu Aug 23 08:27:40 2001 PINI
15 Thu Aug 23 08:27:41 2001 PP0d
16 Thu Aug 23 08:32:40 2001 PINI
17 Thu Aug 23 08:33:07 2001 PINI
18 Thu Aug 23 09:01:12 2001 PINI
19 Thu Aug 23 09:02:09 2001 PINI
Clear Error Log (y/n):

Figure 33-7 Examples of Error and Information Messages

33.4.2 UNIX Syslog
The ZyWALL uses the UNIX syslog facility to log the CDR (Call Detail Record) and system messages to
a syslog server. Syslog and accounting can be configured in Menu 24.3.2 - System Maintenance - Unix
Syslog, as shown next.

Figure 33-8 Menu 24.3.2: System Maintenance: UNIX Syslog (ZyWALL 100)

System Information and Diagnosis
Menu 24.3.2 - System Maintenance - UNIX Syslog
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel
ZyWALL 10~100 Series Internet Security Gateway
INFO getDateTime fail: no server available
INFO adjtime task pause 60 seconds
INFO SMT Session Begin
INFO No DNS server available
WARN Wrong domain name
INFO No DNS server available
INFO Last errorlog repeat 8 Times
INFO getDateTime fail: no server available
INFO adjtime task pause 1 day
SNMP TRAP 0: cold start
INFO main: init completed
INFO adjtime task pause 1 day
INFO SMT Session Begin
WARN system name is not configured
INFO LAN promiscuous mode <0>
INFO SMT Session End
INFO SMT Session Begin
INFO SMT Session End
INFO SMT Session Begin
33-7