Ihse Draco tera 480 Series User Manual page 84

Draco tera
Field
Auto Save
Enable
COM Echo
Enable LAN
Echo
Enable
Redundancy
Synchronize activated
Echo Only
Master IP
Address
84
Selection Description
activated Save the current configuration of the matrix
in the flash memory periodically.
Note: During the save operation, the matrix
will not be operational. Saving takes place
every 600 seconds, as long as changes of
the configuration or switching operations
have been executed in the meantime.
deactivated Function not active (default)
activated Send all switching commands performed in
the matrix as an echo via serial interface.
Note: This function should be enabled
when using a media control via serial
interface.
deactivated Function not active (default)
activated Send all switching commands performed in
the matrix as an echo via LAN connection.
Note: This function should be enabled
when using a media control via LAN
connection or when using stacking with two
ore more matrices.
deactivated Function not active (default)
Automatically switch to the second link of a
activated
connected redundant CON Unit when
losing the primary link of a CPU Unit
(default)
Note: This function will have to be activated
for both matrices in a fully redundant setup
deactivated Function not active
Synchronize the sub matrix to the switch
status of the master matrix.
deactivated Function not active (default)
activated Synchronize the matrix according to the
echo of a second matrix.
Note: This is a bidirectional synchronization
where both matrices have to be configured
as Synchronize with the Master IP of the
respective other matrix.
deactivated Function not active (default)
Numerical Set the network address of the master
value matrix (default value: 000.000.000.000)
2020-02-26