Table of Contents
Advertisement
Possibility 2:
➔ Select View > Matrix in the task area or select View > Port when
using a Matrix Grid.
Menu View - Matrix
In order to perform switching operations between CON and CPU Devices
proceed as follows:
1.
Move the mouse cursor to the port that has to be switched.
2.
Hold down the left mouse button and move the cursor to the port that
has to be connected to the initial port. The current cursor movement
will be displayed by a black auxiliary line.
3.
Release the left mouse button. A popup to select the available
switching type (Full Access, Video Access or Private Mode) will be
opened.
4.
Select the desired switching type. The switching operation will be
immediately executed. At the same time all extender units that are
assigned to the involved devices will be switched.
If a port is shown with a red cross on Matrix View, the console does not
have access rights to the CPU connected to that port.
2020-02-26
Operation
215
Advertisement
Table of Contents
