Ihse Draco tera 480 Series User Manual page 48

Draco tera
You can select the following traps:
Trap
Status
Temperature
Insert Board
Remove Board
Invalid Board
Insert Extender
Remove Extender
Switch Command
Fan Tray #1
Fan Tray #2
Power Supply #1
Power Supply #2
Power Supply #3
Power Supply #4
In order to query the SNMP status, proceed as follows:
➔ Select Status > SNMP in the main menu.
For an activation of the SNMP agent function or the SNMP server
function, a restart of the matrix is necessary.
Two SNMP servers can be used at the same time.
48
Description
Notification about matrix status
Notification about temperature within the matrix
Notification about insertion of a new I/O board into a
slot
Notification about removal of an I/O board out of a
slot
Notification about a faulty I/O board
Notification about a newly connected extender to
the matrix, notification about a switched on
extender, notification about a newly established link
between extender and matrix
Notification about a removed extender from the
matrix, notification about a switched off extender,
notification about an interrupted link between
extender and matrix
Notification about a performed switching operation
at the matrix
Notification about the status of fan tray #1
Notification about the status of fan tray #2
Notification about the status of power supply unit #1
Notification about the status of power supply unit #2
Notification about the status of power supply unit #3
Notification about the status of power supply unit #4
2020-02-26