Table of Contents
Advertisement
Draco tera
The 'Hot Key' sequence to enter Command Mode can be changed. The
following table lists the 'Hot Key' Codes for the available key sequences:
'Hot Key' Code
0
2
3
4
5
6
7
8
In a combined KVM matrix / U-Switch configuration, choose different 'Hot
Keys' for the KVM matrix and the U-Switch.
Set freely selectable 'Hot Key' (exemplary)
In order to set a freely selectable 'Hot Key' (e.g. 2x <Space>), use the
following keyboard sequence:
<current 'Hot Key'>, <c>, <0>, <Space>, <Enter>
Set 'Hot Key' for direct OSD Access
Next to the 'Hot Key' for standard functions, this 'Hot Key' can be
exclusively used for opening the OSD directly.
In order to select a 'Hot Key' from the 'Hot Key' table for a direct opening
of the OSD, use the following keyboard sequence:
<current 'Hot Key'>, <f>, <'Hot Key' code>, <Enter>
In order to select a freely selectable 'Hot Key' (e.g. 2x <Space>) for
opening OSD directly, use the following keyboard sequence:
<current 'Hot Key'>, <f>, <0>, <Space>, <Enter>
Reset 'Hot Key'
In order to set a 'Hot Key' back to default settings of the extender, press
the key combination <Right Shift> + <Del> within 5 s after switching on the
CON Unit or plugging in a keyboard.
62
'Hot Key'
Freely selectable (from 2012-01-12 on)
2x <Scroll>
2x <Left Shift>
2x <Left Ctrl>
2x <Left Alt>
2x <Right Shift>
2x <Right Ctrl>
2x <Right Alt>
2020-02-26
Advertisement
Table of Contents
