Table of Contents
Advertisement
You can select the following keyboard commands:
Function
Decrease assignment number of the extender
unit
Increase assignment number of the extender
unit
In order to create a new console, proceed as follows:
1.
Press the New Device button.
2.
Select a real console (Create a real Console) or a virtual console
(Create a virtual Console) or a template of an existing console
(Choose template).
A template can only be used, if there is at least on existing CON Device.
3.
Press the OK button.
4.
Determine all parameters that are relevant for the console.
5.
To confirm a created console, press the Apply button.
To run a CPU via a matrix, one or more CON Units (extender) must be
assigned. To place an assignment, proceed as follows:
1.
Select the console in the CON Devices list that has to be assigned to
an extender.
2.
Select the extender in the Extender available list that should be
assigned to the CON.
3.
Perform the assignment by pressing the > button. To assign all
available extenders to the console, press the >> button. The
assignments are displayed in the Extender assigned list.
4.
Confirm the assignment by pressing the Apply button.
In order to remove an extender assignment, proceed as follows:
1.
Select the console in the CON Devices list to be modified.
2.
Select the extender(s) in the Extender assigned list to be removed.
3.
Remove the assignment with the < button. To remove all existing
assignments, press the << button.
4.
Confirm the changes by pressing the Apply button.
2020-02-26
Configuration
Keyboard Command
<+>
<->
145
Advertisement
Table of Contents
