Table of Contents
Advertisement
Draco tera
OSD
➔ Select Switch in the main menu.
Menu – CON Switch
In order to switch to a local source, proceed as follows:
1.
If you are not in the Switch menu of the OSD, start Command Mode
with the 'Hot Key' (see Chapter 5.1, Page 61).
2.
Press <o> to open OSD.
You will see a list of all available CPUs as a start menu.
3.
Switch to the CPU in the Local CPU list.
The switching operation to the local source will be performed
immediately.
The local source (computer, CPU) will be only shown in the OSD, if the
connected CON Unit includes the option for a local connection.
As an alternative, the following keyboard commands are available to
switch to the local source:
220
2020-02-26
Advertisement
Table of Contents
