Table of Contents
Advertisement
OSD
➔ Select Configuration > Date+Time in the main menu.
Menu Configuration – Date + Time
In order to configure a time server, proceed as follows:
1.
Set the SNTP Client option to Y (Yes).
2.
Enter the IP address of your SNTP server in the SNTP Server field.
3.
Select your time zone in the Time Zone field.
4.
Press the Okay button to confirm your settings.
5.
Restart the matrix. The system time will be now provided by the
SNTP server.
In order to set the real time clock without using SNTP, proceed as follows:
1.
Set the current date in the Date field.
2.
Set the current Day in the Day field.
3.
Set the current time in the Time field.
4.
Press the RTC button to confirm your settings.
2020-02-26
Configuration
105
Advertisement
Table of Contents
